商鋪名稱：午虎特種合金（上海）有限公司
聯系人：蔡玉蘭（小姐）
聯系手機：
固定電話：
企業郵箱：18117348636@163.com
聯系地址：泗磚路600號
郵編：200000
聯系我時，請說是在五金機電網上看到的，謝謝！
NILOR CF36 焊絲
NILO CF36 焊絲主要用于NILO 36合金的熔化極氣體保護焊、鎢極氣體保護焊和埋弧焊。NILO CF36 焊絲與NILO 36合金一樣具有較低的熱脹特性，這防止的了凝固裂紋和再熱裂紋的產生。當這種焊絲用于噴射過渡的GMAW焊接過程時，推薦使用氬氣作為保護氣體；當用于GMAW脈沖焊接和短弧焊接時，推薦使用氬氣和25％氦氣混合氣體作保護氣；當用于SAW焊接時應當使用INCOFLUX 6焊劑。
|
規格 無
|
|
典型化學 Ni…………..36 成分 Fe………..…62 C…………...0.2 Mn…………0.4 Nb…….…...1.6
|
|
典型機械 拉伸強度，psi 80,000 性能 Mpa 550 屈服強度（0.2％偏移量），psi 60,000 Mpa 414 延伸率，(4d)% 25 沖擊強度（ft-lbs） 41 （70oF）（Joules） 56
|
|
產品供貨形態 |
|
線卷狀焊絲直徑：0.045” 直焊絲直徑：3／32” |
直焊絲的長度為：915mm(36”)或1000mm(39”)
NILO CF36 welding wire is mainly used for the welding of the melting electrode of NILO 36 alloy, the welding of tungsten electrode gas and the submerged arc welding. The NILO CF36 electrode has a low thermal expansion property as the NILO 36 alloy, which prevents the production of solidified cracks and reheat cracks. When this wire is used for the GMAW welding process of spray transition, argon is recommended to protect the gas. When used for GMAW pulse welding and short arc welding, it is recommended to use argon gas and 25% helium mixture to protect gas. INCOFLUX 6 flux shall be used when used for SAW welding.
Specifications without
Typical chemical Ni... ... 36
Element Fe......... ... ... 62
C............ ... 0.2
Mn............ 0.4
Nb... .... ... 1.6
Typical mechanical tensile strength, psi 80,000
Properties of 550 Mpa
Yield strength (0.2% offset), psi 60,000
414 Mpa
Extension, (4d)% 25
The impact strength (ft-lbs) 41
(70 of) (Joules) 56
Product form
Diameter of wire coil wire: 0.045 "straight wire diameter: 3/32"
The length of straight wire is: 915mm(36 ") or 1000mm(39 ").
